Life goals: wood oven-roasted turkey

We have a turkey recipe we do every other Thanksgiving – when we’re with my side of the family.  It’s a Martha Stewart recipe, pretty simple really: rub the bird down with salt and crushed bay leaf a day or two before, let it sit in the fridge, then baste it with white wine, butter and more bay leaf.  It gets consistent raves and we’re proud of it.  One day I’d like to do it in a wood-burning oven – or, better yet, a biomass-burning oven.

So, to feed my fantasies, I did a bit of searching, and I found some articles.  I’m putting them here for my benefit as well as yours.

Thanksgiving Turkey recipe from Mugnaini wood fired ovens.  These are gorgeous Italian ovens and the site is a joy to look at.  I’m not sure how well these would take alternative solid fuels other than wood, but it looks like they make efficient use of the wood.

Turkey the old-fashioned way by Linda Gabris in Backwoods Home Magazine, which I need to read more.  (What did people do in the old days before aluminum foil?)

Here’s a Traditional Turkey recipe from Traeger Grills.  I really want to learn more about these grills: the idea of using wood pellets for a barbecue grill is nifty.  They make their pellets out of selected hardwoods for the smoke flavor, but it seems to me this also holds great potential for fuel efficient, maybe carbon neutral roasting and baking.

Speaking of efficient use of minimal fuel: last, but not least, here’s a video of someone roasting a turkey in a Cobb Grill:

Don’t snub the humble can

I wrote in an earlier post about hoboes and their rumored sterno habits.  But sterno stoves are far from the only cooking devices used by those romantic wandering men . . .

(Really, what makes that so romantic: the Great Depression, riding railcars, John Steinbeck novels, etc?  I’m sure it was no picnic for all the homeless men who eked out their marginal living in those times.  I’m reminded of a Suzanne Vega song I once heard.)

If you’re traveling light and don’t have much and want to cook over something more efficient than a bare fire, what better technique than just to put the fire in a simple food can?  And so we have the hobo stove, operating on the most basic principle: to concentrate the heat of a fire, contain it.

If you look up “hobo stove” on youtube you’ll find several videos of people making and using these variations on the basic theme.  And apparently if you want a lightweight bit of hiking gear that gives a touch of aluminum grace to this design, there’s the Swiss Army Volcano Stove (3 Piece Set), which has many very good reviews.  I think I’d like to get myself one.  (Again, that’s the thing about getting into simple light stoves: it can be addictive.)

There’s also a company that I’m watching called Siege Stoves, who make ingenious crosspieces with sharp fangs that you can use to punch holes in cans of various sizes, and then put on top for pot stands.  Siege Stoves is planning a big expansion and I hope they make it, and make it soon.  Their product can be used to make a simple hobo-style stove as well as a woodgas stove.

Really, all this is very much like what I have done with my Sterno Single Burner Folding Stove – 50002, using it as a firebox, after watching some videos like this one.  My daughter and I still remember the picnic we had with that, out on the pebble bar in the Snake river, before the dam let the irrigation water down for the summer.  Bright sun, cool breeze and a bald eagle in the sky above us.

Rocket rice and woodgas woes

A couple of days ago I set out to cook dinner on two of my stoves: the larger woodgas one, and the rocket, also homemade.  Both of them are made out of #10 cans, with the fire hole from the rocket stove slightly smaller.  I’ve cooked over the rocket stove and found it both powerful and easy to control.  The downsides to the rocket stove are that it blasts the heat in a small area and leaves thick soft black soot on the bottom of the pot or pan.  I’ve contemplated scraping that soot off and collecting it to make ink – I don’t know how much I’d have to collect or where I’d have to store it, so I haven’t worked up the gumption to do that.

I cook over these stoves with pots and pans made for camping or bought from the local thrift store, so I don’t worry about them too much, but I do fear that having so much heat concentrated in the center will wreck a pan after a while, and I really would like to find a way to use these stoves that would spread the heat more evenly over the bottom.

In the two occasions when I’ve cooked rice over the rocket stove (maybe not very imaginative, but it’s easy), the rice has cooked up uniformly enough even though the heat was blasting in the center.  So that’s encouraging.  And on this occasion, when I did a simple stew in a pan . . . but I’m getting ahead of myself.

2015-07-04 Rocket stove 3 rice
Cooking short-grain rice in July, shortly after I finished my rocket stove

Since I had had success cooking rice on my rocket stove, I decided I’d do a simple sort of Indian-style dinner: jasmine rice and stewed garbanzos.  I’d cook it on two stoves.  After my previous attempt to cook over the large gasfier using pellets, I thought I knew how to make it run properly.  So I set up the stoves and gathered my ingredients.

2015-09-17 dual stoves 1
The stoves ready to be lit, with fuel and pot stand

From the start, this was beset with problems: my quest puts me to the test.  I had to set up utensils and ingredients in a less than ideal space (on the driveway) and deal with the “help” of neighbor children and the wanderlust of a child who keeps running off into neighbors’ yards down the street out of my voice range.  At least they went and got a bunch of fresh Roma tomatoes from the garden as I asked.  I put the rice on the rocket stove to give it a head start and melted the butter in the frying pan over the gasifier . . .

which went out again.

Later I figured out that I’ve made the holes too small in this bigger gasifier to work with pellets, but at the time I was very, very annoyed: why wouldn’t the thing work?!  This is the kind of thing that you have to go through when you’re on a Quest.

I got the rice cooked over the rocket stove then (with a couple of green cardamom pods in), and then put the frying pan back on.  To the melted butter I added some garlic and ginger paste, then my spices: black cardamom, cinnamon, cloves, chili and lots of cumin.  Then – calling for my child – I cut up the tomatoes from the garden and fried them in that fragrant mix for a while.

2015-09-17 dual stoves 3

After that I dumped in the can of garbanzos – nothing fancy.  I didn’t cook them from scratch this time.

2015-09-17 dual stoves 4

I let that simmer/almost boil for the next while, as I continued to call for my wayward child and stave off the usual parental panic.  I live in a safe neighborhood, and she has a history of blithely running off to play with friends at its edges, but I had told her not to go far, and I was annoyed at my gasifier not working, so I was on edge . . .

I brought in the food and then my daughter appeared, safe and sound, of course.  And I tasted the food and it was nothing fancy, but it was good.  I had cooked another meal over an efficient fire.  Despite the setbacks, I had achieved another feat of voluntary simplicity.  It didn’t feel simple at the time!  Juggling all of the components while sitting on a driveway, rather than in a furnished modern kitchen.  But I did it.  And having read and thought and reached conclusions about voluntary simplicity, I stuck with a frustrating and difficult experience in putting them into practice.

That is always the key to making real changes: staying with a course of action after the initial motivating emotion has evaporated.

Temporary setbacks

I know that Labor Day weekend has come and gone. I meant to do some outdoor cooking over the weekend: specifically I wanted to learn to fry onions over my woodgas stoves.

I did some very good burn tests of two of my stoves on Saturday and Sunday. I mentioned the difficulty I had had with fuel pellets. I tried pouring a bit of Heet over the top of the load before lighting, and it worked. Both stoves were a slow start. The small one (1 quart paint can outer, Progresso soup can inner) took about half an hour to really get going, but then it gave me a good solid 40 minutes. The larger one (#10 outer, large chili inner) took maybe 15 to really get going, and then burned for a solid hour.

I was quite pleased. Here are some pictures.

DSCN5229
The small stove, with nice bright flames at dusk.
DSCN5238
The large stove, with not-so visible, but still good flames at midday.

DSCN5233 DSCN5249

I should have cooked on them during the test burns, but I confess: I was catching up with relatives I haven’t seen in awhile. Besides, I thought: now that I know these work, I’ll cook on them on Monday!

On Monday I decided I’d make the fire catch on and start pyrolisis faster by soaking some of the pellets in the Heet for a while before putting them on top. Unfortunately, I did two things wrong:

I soaked them too long, and found out that pellets turn to mush in alcohol like they do in water.

I overloaded the stove, obstructing the holes. I tried to clear spaces for the jets, but it wasn’t good enough.

I spent too much time trying to get it to work, and then I gave up and fried my onions inside. The afternoon was wearing on and we had to get ready for a long drive home (through beautiful mountain scenery: every time I drive along I-15 between Ogden, Utah and McCammon, Idaho I want to just park the dang car and go exploring for a few days).

So that is why I don’t have a blog post about frying onions today.

Cooking with (wood) gas: porridge

I’ve been trying to make my homemade woodgas stoves work with pellets.  I’m still figuring it out.  People like this guy are able to produce flames of 1500 degrees F with pellets in small can-built stoves.  My stoves haven’t been so carefully made, but they’ve performed well enough with sticks and chips and chunks.  Pellets, though: I keep having them go out less than halfway through.

This morning, since I don’t have to be at work until noon, I decided to try my little stove with another load of pellets to cook porridge, a favorite of mine for breakfast.

First, something about this porridge: I ate conventional oatmeal made from rolled oats when I was younger, but I never was fully converted to the texture, and after a while I decided I didn’t like it much.  Then I tried Scottish oats, and I fell in love with them.  I’ve had steel-cut too, which are nice, but I most definitely favor the texture of the coarse-ground groats when they’re cooked thoroughly.  I like to buy the groats whole and then run them through a hand-cranked auger grinder at a loose setting.

There’s something else I do: I add plenty of salt to them near the end of cooking, and I season them with herbs.  My standard recipe is a bit of ground rosemary and sage, and then maybe some pepper and butter in the bowl when I eat them.  Sometimes I’ll add nutmeg too, though I find I like that best with thyme.

Well, after getting the pellets started, I put the water on, in one of my outside pots.  It’s shallower than I like to use for porridge: I stir with a spurtle and I like to get it poked way down in.  But this was what I had.

woodgas stove 2015-08-26 porridge 1

The gas jets flickered faintly and fitfully: it was hard to get a picture of them.  Their insubstantial blue color seemed like a good sign, but they were destined to disappoint today.

In went the oats, and they simmered away happily for a while.

woodgas stove 2015-08-26 porridge 2

By the way, this was about three parts water to one part oatmeal: in this case 2 1/4 cups to 3/4.  While this was cooking I prepared the seasoning: a few rosemary leaves,

woodgas stove 2015-08-26 porridge 3 mortar

ground up with some salt

woodgas stove 2015-08-26 porridge 4 mortar

and a couple of sage leaves.

woodgas stove 2015-08-26 porridge 5 mortar

I took that out to where I thought my porridge was simmering, to find that the dang stove had gone out.  This has not happened when I’ve used other fuel, so I’m not sure what I should be doing different with the pellets.  I like the idea of using pellets.  I like being able to burn scavenged and salvaged chunks and sticks too, but pellets are so convenient and compact.  I like their smell, I like paying five dollars for a forty pound bag.  I wonder if I need more or bigger intake holes.

Somehow, Lucia stoves manage to burn for up to 6 hours on a load of pellets.  So it can’t be only a matter of the fuel being packed too tightly: those stoves are much larger than mine.

I’ll keep posting about my experiments with them.  Meanwhile, here’s what I did with my porridge.  I stirred in my seasoning

woodgas stove 2015-08-26 porridge 6 stir
(My spurtle is a wizard wand I bought from local artisans at a festival, so I can conjure a patronus with it if I need to.)

woodgas stove 2015-08-26 porridge 7 stir

and then I ate it.

People are often surprised when I tell them how I season my porridge: Americans aren’t used to having savory oatmeal.  I’ve been eating it this way for years and I won’t go back.  Try sage and rosemary in yours, it’s delicious.

Cooking with (wood) gas: rice pilaf

I’ve built three wood gas stoves so far, and this evening I cooked on one of them.  Having cooked rice on my rocket stove before, I decided that a simple rice pilaf should work for testing out this new gasifier.

In a later post I’ll write more about wood gas stoves and my experiments with building them.  Suffice to say for now that the stove I used this evening I made from a #10 can and another large can whose exact volume I forget – it was a family size chili can, almost as tall as the #10 and quite noticeably narrower.  I wasn’t sure how well it would work to have so much space between the two, but today at least it put out a very impressive flame, for long enough not only to cook my rice but . . . we’ll get to that.

This is the recipe that I improvised:

  • 3 cups jasmine rice
  • 4 cups water
  • butter (maybe 3 Tb?)
  • 1 cube vegetable buillion
  • 1 tsp cumin
  • dash of cinnamon
  • a bit of salt – not quite enough
  • some leftover fried red onions

I put everything together except for the onions in my wide shallow pot and let it soak while I fired up the stove.  I loaded the stove with fruit wood chunks – plum and apple, I think (salvaged from a neighbor’s pruning).  I brought the pot to a boil and stirred in the onions.

Woodgas stove 2015-08-23 02 flames

Woodgas stove 2015-08-23 01 pilaf uncovered

Then I put on the lid.

Woodgas stove 2015-08-23 03 pilaf covered

I was afraid that it might boil over, but it didn’t.  I did wish I had made a taller pot stand, because the flames often licked around the sides and up to the lid.  Fruit tree prunings are good fuel!  I cook pilafs on low heat on a conventional stove, so I was a bit nervous as to how this would turn out.  But I kept it on the flame until the pyrolisis phase stopped, and then, when the only flames were those nearly invisible ones coming up from the coals, I took out the pot stand (had to use two layers of leather gloves) and sat the pot right on the stove opening – partly to help smother the char, partly to make the best use of the heat from the coals.

I think that was my mistake: upon serving out the pilaf (after letting it sit for about 20 minutes), I found a burnt spot on the bottom, about the diameter of the stove opening.

Woodgas stove 2015-08-23 04 pilaf served

Despite that, the rest of the pilaf turned out wonderfully.  The rice grains were cooked through, separate, and had that certain chewiness that I personally prefer.  So I call this a success.  The family thought so too.  It went wonderfully well with pan-fried chicken and a yogurt-cucumber sauce.

Things to do next time:

  • Time the cooking!  I was too lazy to go and get my phone to keep my eye on the clock today: I set up the stove at the back of the back yard.
  • Take the rice off the stove when the gas jets stop, or after 15 minutes of cooking time if that comes first.
  • Maybe try making that taller pot stand.

My confidence in cooking with my stoves has grown another step with tonight’s success.  I noted that although the pot was coated with soot, it’s the shiny, enamel-like soot, of which very little rubs off.  After washing, the pot is still black, but I can touch it without getting my fingers blackened.  It’s different from the matte black soot from the rocket stove (which I think would make a good ink base).  I personally don’t mind having a separate set of cookware with a permanent black sheen; I think it looks rather spiffy.